TECHNICAL ANALYSISTest Method: US Code of Federal Regulations Part 1500.44, Title 16
|
Flammability test on rigid and pliable solids: Pass
Polyester Resin Based Metalized Panel 0.004 |
- A sample is considered to have passed the test if the burning rate is not more then 0.10 inch per second.
- Test Method: As specified in AOAC 16th Ed. Section 973.32 & 973.82
- Polyester resin-based metalized panel / bowl
- Lead & Cadmium content in earthenware quantilation by AAS: PASS
|
SGS Laboratory No. |
Extract, Volume (||) |
Lead, ppm (mg/L) |
Cadmium, ppm (mg/L) |
14324 |
2.0 |
<1.0 |
<0.25 |
14324 |
2.0 |
<1.0 |
<0.25 |
14324 |
2.0 |
<1.0 |
<0.25 |
14324 |
2.0 |
<1.0 |
<0.25 |
14324 |
2.0 |
<1.0 |
<0.25 |
14324 |
2.0 |
<1.0 |
<0.25 |
|
Limit for FDA (any one of six) |
|
1.0 ppm |
0.25 |
|
|
|
|
Notes: |
1. < = less than
2. mg / L = milligrams per liter
3. ppm = parts per million |
AAS = ATOMIC ABSORPTION SOECTROPHOMETER |
|
|
Conclusion: The client submitted samples described above comply with the leachable lead and cadmium requirements of the American Food and Drug Administration (FDA).
Test Method: Nitric Acid digestion and analyzed by Atomic Absorption Spectrophotometer.
Test Sample: 04249 stone/Slate on Resin 12×12 tile size 6 x 12 |
|
Test Sample: 04249 stone/Slate on Resin 12×12 tile size 6 x 12
To determine the soluble Heave Metal contents in accordance with the European Standard
EN 71 part 3.1994+ |
A1:2000 - Migration of certain elements |
Migration of Certain Element |
04249 |
Limit |
Soluble Lead (pb), mg/kg |
12.7 |
90 mg/kg |
Soluble Antimony (sb), mg/kg |
<5 |
60 mg/kg |
Soluble Arsenic (As), mg/kg |
0.2 |
25 mg/kg |
Soluble Barium (Ba), mg/kg |
<0.5 |
1000 mg/kg |
Soluble cadmium (Cd), mg/kg |
<0.5 |
75 mg/kg |
Soluble Chromium (Cr), mg/kg |
7.5 |
60 mg/kg |
Soluble Mercury (Hg), mg/kg |
<0.5 |
60 mg/kg |
Soluble Selenium (Se), mg/kg |
<0.5 |
500 MG/KG |
Notes: |
Methodology: with reference to EN 71 Part 3.1994 + A1:2000 by inductively coupled argon
plasma (ICP-OES)Analysis 04249 Lead (Pb), ppm ND (None detected) detection limit for Pb is 5.0 ppm
|
|
|